Primary Coverage : Fringe Coverage

support & download

Smartone Solar Brochure - 187KB PDF

SMARTONE solar

SmartOne Solar is the only solar asset tracker certified as Intrinsically Safe with ATEX Zone 0 and HERO (Hazard of Electromagnetic Radiation to Ordinance) certifications for hazardous environments. Virtually maintenance-free with up to 10 years of usable service for tracking and monitoring, it’s easy to install – requiring no harnesses, external power, or external antennas. In addition, the SmartOne Solar features a wide range of reporting capabilities with inputs available to monitor critical functions from engine run time to tank level and alarms.

FEATURES

• Solar-powered with up to 10 years of battery life
• Intrinsically Safe IoT asset tracking solutions
• Bluetooth interface for configuration and firmware updating
• Two dry contact or wetted-voltage inputs available to manage engine run time, tank level or various alarm inputs
• Quick and easy installation requires no harnesses, external power or external antennas
• Wide range of reporting capabilities Including;

• GPS Location reporting in 4 modes
• Geofencing with configurable range setting
• Stationary or in-motion reporting
• Reduced messaging & theft recovery modes
• Receives and transmits data from external sensors
• 12 different reporting times
• Interval or 24-hour operation mode
• Alternate reporting schedules
• Low battery message
• Motion Sensor/Vibration parameter and scheduling
• Contact closure parameters
• Diagnostic messages
• Include Speed and Heading data in reported motion messages

specifications

• Dimensions: 8.26 CM (H) X 17.78 CM (W) X 2.86 CM (D)
• Weight: 385 g
• Operating Temperation: -40° C to +65° C
• NOTE: The unit is certified intrinsically safe for hazardous environments over the temperature range of -40° C to +65° C
• Input Voltage: 10 TO 48 VDC (optional cable required)
• NOTE: Device is not intrinsically safe when any cable is connected.
• Battery Type: Built-in rechargeable NiMH batteries (non-replaceable)
• 
  
• CERTIFICATIONS & STANDARDS

• FCC, ISED, CE, AUS/NZ, ANATEL, INMETRO CERTIFICATE – LMP 19.0127 X, JQA(JAPAN), IFT, ARECOM, ENACOM, KCC, NCC, ASEP AND ICASA
• ATEX/IECEx Ex II 1 G,Ex ia IIC T4 Ga For international Zone 0 applications, HERO
• North America cETLus:
• Class I, Division 1, Groups A-D, T4
• Class I, Zone 0, AEx ia IIC T4 Ga
• WEEE Compliant
• GMPCS-MoU
• IP68/69K
• MIL-STD-810G for:
• Immersion
• Impact resistance
• Salt Fog
• Acidic Atmosphere
• Humidity
• Vibration